高级检索

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

CiADS固态功率源的可用性设计与分析

高鹏辉 王志军 孙列鹏 贾永智 秦元帅 何源 黄贵荣

高鹏辉, 王志军, 孙列鹏, 贾永智, 秦元帅, 何源, 黄贵荣. CiADS固态功率源的可用性设计与分析[J]. 原子核物理评论, 2018, 35(3): 287-293. doi: 10.11804/NuclPhysRev.35.03.287
引用本文: 高鹏辉, 王志军, 孙列鹏, 贾永智, 秦元帅, 何源, 黄贵荣. CiADS固态功率源的可用性设计与分析[J]. 原子核物理评论, 2018, 35(3): 287-293. doi: 10.11804/NuclPhysRev.35.03.287
GAO Penghui, WANG Zhijun, SUN Liepeng, JIA Yongzhi, QIN Yuanshuai, HE Yuan, HUANG Guirong. Availability Designs and Analyses of Solid-state Amplifiers for CiADS[J]. Nuclear Physics Review, 2018, 35(3): 287-293. doi: 10.11804/NuclPhysRev.35.03.287
Citation: GAO Penghui, WANG Zhijun, SUN Liepeng, JIA Yongzhi, QIN Yuanshuai, HE Yuan, HUANG Guirong. Availability Designs and Analyses of Solid-state Amplifiers for CiADS[J]. Nuclear Physics Review, 2018, 35(3): 287-293. doi: 10.11804/NuclPhysRev.35.03.287

CiADS固态功率源的可用性设计与分析

doi: 10.11804/NuclPhysRev.35.03.287
基金项目: 国家自然科学基金资助项目(Y636030GJ0)
详细信息
    作者简介:

    高鹏辉(1991-),男,甘肃天水人,硕士研究生,从事加速器物理研究;E-mail:gaoph2016@impcas.ac.cn

    通讯作者: 王志军,E-mail:wangzj@impcas.ac.cn。
  • 中图分类号: O572.21+1

Availability Designs and Analyses of Solid-state Amplifiers for CiADS

Funds: National Natural Science Foundation of China(Y636030GJ0)
  • 摘要: ADS加速器面临的一大技术挑战是高可用性要求,进行固态功率源可用性设计是为ADS加速器的可用性设计与分析做准备。首先对CiADS的可用性要求进行了分配,固态功率源的分配结果为0.999;然后对固态功率源进行了初步可用性设计,分析的结果无法满足要求;最后对固态功率源进行了冗余设计,使用Reliasoft软件建立了固态功率源的可靠性框图,分析结果显示:满足一定的维修条件下,当其他元件的平均故障间隔时间(MTBF)达到171 702 h,25/28冗余设计可以满足0.999的可用性要求。


    One of the challenging technologies of ADS is the high availability requirement. The availability design of the solid-state amplifier is the preparation for ADS. Firstly the availability requirement of CiADS is proposed as 0.8. The distribution result of the solid-state amplifier is 0.999 according to this requirement. Then the availability result shows the preliminary design of solid-state amplifiers can not reach the availability requirement. At last the power loss is considered to build the k/N redundancy model of the main amplifier and the mean time between failure (MTBF) is calculated for various redundancy models. The reliability block diagram of the solid-state amplifier is set up by Reliasoft and the simulation results show that the 25/28 redundancy model can meet the requirement 0.999 when MTBF of other components reaches 171 702 hours with the certain maintenance.
  • [1] AIT ABDERRAHIMH H, GALAMBOSD J, GOHAR Y, et al. Accelerator and Target Technology for Accelerator Driven Transmutation and Energy Production[R]. United States Department of Energy, 2010.
    [2] CARMINATI F, KLAPISCH R, REVOL I P, et al. An Energy Amplifier for Cleaner and Inexhaustible Nuclear Energy Production Driven by a Particle Beam Accelerator[R]. Switzerland:CERN, 1993.
    [3] BOWMAN C D. Annu Rev Nucl Part Sci, 1998, 48:505.
    [4] ZHAN Wenlong, XU Hushan, Bull Chin Acad Sci, 2012, 27(3):375. (in Chinese) (詹文龙, 徐瑚珊. 中国科学院院刊, 2012, 27(3):375.)
    [5] WANG Zhijun, HE Yuan, LIU Yong, et al. Chin Phys C, 2012, 36:256.
    [6] BARGALLO E. IFMIF Accelerator Facility RAMI Analyses Engineering Design Phase[D]. Spain:Polytechnic University of Catalonia, 2014.
    [7] FILIPPINI R, DELMING B, GUAGLIO G, et al. Reliability Assessment of the LHC Machine Protection System[R]. Switzerland:CERN, Proceedings of PAC05, 2005.
    [8] JAKUB JANCZYK, ISABELLE LAUGIER, SERGIO PASINELLI, et al. Fault Tracking at the LHC[R]. Switzerland:CERN, EuCARD, 2015.
    [9] SCHMIDT R. Machine Protection and Interlock Systems for LHC[R]. Switzerland:CERN, EuCARD, 2015.
    [10] SCHMIDT R. Reliability and Availability of Machine Protection Systems[R]. Switzerland:CERN, U.S. Particle Accelerator School, 2017.
    [11] GUTLEBER J. FCC Reliability, Availability, Maintainability, Supportability Study[R]. Switzerland:CERN, EuroCirCol, 2017.
    [12] BARGALLO E. Reliability and Availability at ESS[R]. ESS, 4th International Workshop on ADSR systems and Thorium, 2017.
    [13] JEAN-LUC BIARROTTE. Reliability challenges for SC linacs as ADS drivers[R]. Switzerland:CERN, 2015.
    [14] PITIGOI A E,FERNANDEZ R P. Reliability Modeling of an ADS Accelerator[R]. Switzerland::CERN, 2015.
    [15] MARCHAND P, RUAN T, RIBEIRO F,et al. Phys Rev Accel Beams, 2007, 10:112001.
    [16] XU Hushan, HE Yuan, PAN Weimin, et al. Design Report of China Initiative Accelerator Driven System[R]. Beijing:Chinese Academy of Sciences. (in Chinese) (徐瑚珊, 何源, 潘卫民, 等.加速器驱动嬗变研究装置可行性研究报告[R]. 北京:中国科学院, 2017.)
    [17] BARGALLO E, GIRALT A, MARTINEZ G, et al. Fusion Engineering and Design 2013, 88:2732.
  • 加载中
计量
  • 文章访问数:  1238
  • HTML全文浏览量:  116
  • PDF下载量:  109
  • 被引次数: 0
出版历程
  • 收稿日期:  2018-03-19
  • 修回日期:  2018-04-12
  • 刊出日期:  2018-09-20

CiADS固态功率源的可用性设计与分析

doi: 10.11804/NuclPhysRev.35.03.287
    基金项目:  国家自然科学基金资助项目(Y636030GJ0)
    作者简介:

    高鹏辉(1991-),男,甘肃天水人,硕士研究生,从事加速器物理研究;E-mail:gaoph2016@impcas.ac.cn

    通讯作者: 王志军,E-mail:wangzj@impcas.ac.cn。
  • 中图分类号: O572.21+1

摘要: ADS加速器面临的一大技术挑战是高可用性要求,进行固态功率源可用性设计是为ADS加速器的可用性设计与分析做准备。首先对CiADS的可用性要求进行了分配,固态功率源的分配结果为0.999;然后对固态功率源进行了初步可用性设计,分析的结果无法满足要求;最后对固态功率源进行了冗余设计,使用Reliasoft软件建立了固态功率源的可靠性框图,分析结果显示:满足一定的维修条件下,当其他元件的平均故障间隔时间(MTBF)达到171 702 h,25/28冗余设计可以满足0.999的可用性要求。


One of the challenging technologies of ADS is the high availability requirement. The availability design of the solid-state amplifier is the preparation for ADS. Firstly the availability requirement of CiADS is proposed as 0.8. The distribution result of the solid-state amplifier is 0.999 according to this requirement. Then the availability result shows the preliminary design of solid-state amplifiers can not reach the availability requirement. At last the power loss is considered to build the k/N redundancy model of the main amplifier and the mean time between failure (MTBF) is calculated for various redundancy models. The reliability block diagram of the solid-state amplifier is set up by Reliasoft and the simulation results show that the 25/28 redundancy model can meet the requirement 0.999 when MTBF of other components reaches 171 702 hours with the certain maintenance.

English Abstract

高鹏辉, 王志军, 孙列鹏, 贾永智, 秦元帅, 何源, 黄贵荣. CiADS固态功率源的可用性设计与分析[J]. 原子核物理评论, 2018, 35(3): 287-293. doi: 10.11804/NuclPhysRev.35.03.287
引用本文: 高鹏辉, 王志军, 孙列鹏, 贾永智, 秦元帅, 何源, 黄贵荣. CiADS固态功率源的可用性设计与分析[J]. 原子核物理评论, 2018, 35(3): 287-293. doi: 10.11804/NuclPhysRev.35.03.287
GAO Penghui, WANG Zhijun, SUN Liepeng, JIA Yongzhi, QIN Yuanshuai, HE Yuan, HUANG Guirong. Availability Designs and Analyses of Solid-state Amplifiers for CiADS[J]. Nuclear Physics Review, 2018, 35(3): 287-293. doi: 10.11804/NuclPhysRev.35.03.287
Citation: GAO Penghui, WANG Zhijun, SUN Liepeng, JIA Yongzhi, QIN Yuanshuai, HE Yuan, HUANG Guirong. Availability Designs and Analyses of Solid-state Amplifiers for CiADS[J]. Nuclear Physics Review, 2018, 35(3): 287-293. doi: 10.11804/NuclPhysRev.35.03.287
参考文献 (17)

目录

    /

    返回文章
    返回