双平面多圈注入模拟优化程序TPIS的初步开发与验证

姚丽萍; 柴伟平; 杨建成; 夏佳文; 申国栋; 任航; 刘杰; 阮爽; 王耿; 董自强; 蔡付成

doi:10.11804/NuclPhysRev.36.03.322

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

双平面多圈注入模拟优化程序TPIS的初步开发与验证

姚丽萍, 柴伟平, 杨建成, 夏佳文, 申国栋, 任航, 刘杰, 阮爽, 王耿, 董自强, 蔡付成

文章导航 > 原子核物理评论 > 2019 > 36(3): 322-328

姚丽萍, 柴伟平, 杨建成, 夏佳文, 申国栋, 任航, 刘杰, 阮爽, 王耿, 董自强, 蔡付成. 双平面多圈注入模拟优化程序TPIS的初步开发与验证[J]. 原子核物理评论, 2019, 36(3): 322-328. doi: 10.11804/NuclPhysRev.36.03.322

引用本文:

YAO Liping, CHAI Weiping, YANG Jiancheng, XIA Jiawen, SHEN Guodong, REN Hang, LIU Jie, RUAN Shuang, WANG Geng, DONG Ziqiang, CAI Fucheng. Development and Validation of TPIS Program for Two-plane Multiturn Injection and Optimization[J]. Nuclear Physics Review, 2019, 36(3): 322-328. doi: 10.11804/NuclPhysRev.36.03.322

Citation:

YAO Liping, CHAI Weiping, YANG Jiancheng, XIA Jiawen, SHEN Guodong, REN Hang, LIU Jie, RUAN Shuang, WANG Geng, DONG Ziqiang, CAI Fucheng. Development and Validation of TPIS Program for Two-plane Multiturn Injection and Optimization[J]. Nuclear Physics Review, 2019, 36(3): 322-328. doi: 10.11804/NuclPhysRev.36.03.322

双平面多圈注入模拟优化程序TPIS的初步开发与验证

doi: 10.11804/NuclPhysRev.36.03.322

姚丽萍^1,2,
柴伟平¹,
杨建成^1,,
夏佳文^1,3,
申国栋^1,3,
任航^1,2,
刘杰^1,2,
阮爽^1,3,
王耿^1,2,
董自强^1,2,
蔡付成^1,2

1.
中国科学院近代物理研究所, 兰州 730000;
2.
中国科学院大学核科学与技术学院, 北京 100049;
3.
惠州离子科学研究中心, 广东惠州 516003

基金项目: 国家自然科学基金资助项目（11705253）；广东省引进创新创业团队计划资助项目（2016ZT06G73）

详细信息

作者简介:
姚丽萍(1991-),女,甘肃定西人,在读博士,从事加速器物理研究;E-mail:yaoliping@impcas.ac.cn

通讯作者: 杨建成,E-mail:yaoliping@impcas.ac.cn

中图分类号: TL56

Development and Validation of TPIS Program for Two-plane Multiturn Injection and Optimization

1.
Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China;
2.
School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China;
3.
Huizhou Research Center of Ion sciences, Huizhou 516003, Guangdong, China

Funds: National Natural Science Foundation of China(11705253); Special Funding for the Introduced Innovative R&D Team of Guangdong(2016ZT06G73)

摘要: 为满足短时间内达到高累积流强要求，HIAF/BRing采用了一种新的注入方法——双平面相空间多圈注入。该注入方法与传统单平面多圈注入方法不同，而且在国际上是首次在实际项目中采用，尚无实际运行经验。因此，对注入过程进行程序模拟研究是验证双平面多圈注入方案可行性的必要手段。为详细模拟研究BRing双平面多圈注入过程，并克服已有程序跟踪速度较慢且注入参数修改不便的缺点，本文根据双平面多圈注入的特点，建立了双平面多圈注入模型，编写了双平面多圈注入模拟优化程序TPIS（Two-Planemultiturn Injection Simulation）。通过与ORBIT程序模拟结果对比，验证了TPIS程序模拟双平面多圈注入过程的正确性。在此基础上，在TPIS程序中加入了粒子群优化算法，并对BRing注入参数进行了优化。结果表明，TPIS程序可以对注入参数进行有效优化，经过优化后，束流损失减少了28%，最终剩余累积粒子数满足BRing的流强设计指标要求，进一步验证了双平面多圈注入设计的可行性。
- HIAF/BRing /
- 双平面相空间多圈注入 /
- TPIS /
- 注入参数优化
Abstract: In order to meet the high requirement of beam intensity in a short time, a new injection method named two-plane multiturn injection is proposed for HIAF/BRing. This method is different from the traditional single-plane multiturn injection, and it has no practical operation experience. This will be the first time to be used in a practical project. Therefore, it is necessary to verify the feasibility of the two-plane multiturn injection scheme through program simulation. In order to simulate and study the injection process in detail, and to overcome the disadvantages of existing programs such as slow tracking speed and inconvenient modification of injection parameters, the injection model and TPIS (Two-Plane multiturn Injection Simulation) program are developed. By comparing with the simulation results of ORBIT program, it proves that the TPIS program is correct to simulate the two-plane multiturn injection process. On this basis, particle swarm optimization algorithm is added into the TPIS program, and the injection parameters are optimized. The results show that the TIPS program can be used for injection parameter optimization. After the optimization, the injection beam loss is reduced by 28%, and the final accumulate particle number can meet the requirement of design beam intensity. It also verifies the feasibility of two-plane multiturn injection.
- HIAF/BRing /
- two-plane multiturn i /

[1]	YANG J C, XIA J W, XIAO G Q, et al. Nucl Instr and Meth B, 2013, 317:263.
[2]	XIA Jiawen, ZHAN Wenlong, WEI Baowen, et al. Nucl Instr and Meth A, 2002, 488(1):11.
[3]	PRIOR C R, REES G H. Nucl Instr Meth A, 1998, 415:357.
[4]	QU Guofeng, XIA Jiawen, YANG Jiancheng, et al. Nucl Phys Rev, 2018, 35(1):28. (in Chinese) (曲国锋, 夏佳文, 杨建成, 等. 原子核物理评论, 2018, 35(1):28.)
[5]	PLASS G. Nucl Instr Meth A, 1998, 415:204.
[6]	GALAMBOS J, HOLMES J, OLSEN D. ORBIT User Manual, V.1.0. SNS-ORNL-AP Tech. Note 11, 1999:39.
[7]	GRÖBNER O, CALDER R S. IEEE Tran Nucl Sci, 1973, 20(3):760.
[8]	CHAO A. Handbook of Accelerator Physics and Engineering[M]. Singapore:World Scientific, 1999:497.
[9]	LEE S Y. Accelerator Physics[M]. 2nd ed. Singapore:World Scientific, 1999:85.
[10]	GROTE H, ISELIN F C. The MAD Program, Version 8.19. (1996).
[11]	KENNEDY J, EBERHART R C. IEEE, 1995, 4:1942.

点击查看大图

计量

文章访问数: 1030
HTML全文浏览量: 74
PDF下载量: 67
被引次数: 0

双平面多圈注入模拟优化程序TPIS的初步开发与验证

doi: 10.11804/NuclPhysRev.36.03.322

1. 中国科学院近代物理研究所, 兰州 730000;

2. 中国科学院大学核科学与技术学院, 北京 100049;

3. 惠州离子科学研究中心, 广东惠州 516003

基金项目: 国家自然科学基金资助项目（11705253）；广东省引进创新创业团队计划资助项目（2016ZT06G73）

作者简介:
姚丽萍(1991-),女,甘肃定西人,在读博士,从事加速器物理研究;E-mail:yaoliping@impcas.ac.cn

通讯作者: 杨建成,E-mail:yaoliping@impcas.ac.cn

收稿日期: 2018-12-18
修回日期: 2019-02-19
刊出日期: 2019-09-20

中图分类号: TL56

关键词:

HIAF/BRing /

双平面相空间多圈注入 /

TPIS /

注入参数优化

摘要: 为满足短时间内达到高累积流强要求，HIAF/BRing采用了一种新的注入方法——双平面相空间多圈注入。该注入方法与传统单平面多圈注入方法不同，而且在国际上是首次在实际项目中采用，尚无实际运行经验。因此，对注入过程进行程序模拟研究是验证双平面多圈注入方案可行性的必要手段。为详细模拟研究BRing双平面多圈注入过程，并克服已有程序跟踪速度较慢且注入参数修改不便的缺点，本文根据双平面多圈注入的特点，建立了双平面多圈注入模型，编写了双平面多圈注入模拟优化程序TPIS（Two-Planemultiturn Injection Simulation）。通过与ORBIT程序模拟结果对比，验证了TPIS程序模拟双平面多圈注入过程的正确性。在此基础上，在TPIS程序中加入了粒子群优化算法，并对BRing注入参数进行了优化。结果表明，TPIS程序可以对注入参数进行有效优化，经过优化后，束流损失减少了28%，最终剩余累积粒子数满足BRing的流强设计指标要求，进一步验证了双平面多圈注入设计的可行性。

English Abstract

Development and Validation of TPIS Program for Two-plane Multiturn Injection and Optimization

1. Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China;

2. School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China;

3. Huizhou Research Center of Ion sciences, Huizhou 516003, Guangdong, China

Funds: National Natural Science Foundation of China(11705253); Special Funding for the Introduced Innovative R&D Team of Guangdong(2016ZT06G73)

Received Date: 2018-12-18
Rev Recd Date: 2019-02-19
Publish Date: 2019-09-20

Keywords:

HIAF/BRing /
two-plane multiturn i /
/

Abstract: In order to meet the high requirement of beam intensity in a short time, a new injection method named two-plane multiturn injection is proposed for HIAF/BRing. This method is different from the traditional single-plane multiturn injection, and it has no practical operation experience. This will be the first time to be used in a practical project. Therefore, it is necessary to verify the feasibility of the two-plane multiturn injection scheme through program simulation. In order to simulate and study the injection process in detail, and to overcome the disadvantages of existing programs such as slow tracking speed and inconvenient modification of injection parameters, the injection model and TPIS (Two-Plane multiturn Injection Simulation) program are developed. By comparing with the simulation results of ORBIT program, it proves that the TPIS program is correct to simulate the two-plane multiturn injection process. On this basis, particle swarm optimization algorithm is added into the TPIS program, and the injection parameters are optimized. The results show that the TIPS program can be used for injection parameter optimization. After the optimization, the injection beam loss is reduced by 28%, and the final accumulate particle number can meet the requirement of design beam intensity. It also verifies the feasibility of two-plane multiturn injection.

引用本文:

Citation:

YAO Liping, CHAI Weiping, YANG Jiancheng, XIA Jiawen, SHEN Guodong, REN Hang, LIU Jie, RUAN Shuang, WANG Geng, DONG Ziqiang, CAI Fucheng. Development and Validation of TPIS Program for Two-plane Multiturn Injection and Optimization[J]. Nuclear Physics Review, 2019, 36(3): 322-328. doi: 10.11804/NuclPhysRev.36.03.322

全文HTML

参考文献 (11)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

留言板

双平面多圈注入模拟优化程序TPIS的初步开发与验证

doi: 10.11804/NuclPhysRev.36.03.322

作者简介: 姚丽萍(1991-),女,甘肃定西人,在读博士,从事加速器物理研究;E-mail:yaoliping@impcas.ac.cn

通讯作者: 杨建成,E-mail:yaoliping@impcas.ac.cn

Development and Validation of TPIS Program for Two-plane Multiturn Injection and Optimization

计量

出版历程

双平面多圈注入模拟优化程序TPIS的初步开发与验证

doi: 10.11804/NuclPhysRev.36.03.322

1. 中国科学院近代物理研究所, 兰州 730000; 2. 中国科学院大学核科学与技术学院, 北京 100049; 3. 惠州离子科学研究中心, 广东 惠州 516003

作者简介: 姚丽萍(1991-),女,甘肃定西人,在读博士,从事加速器物理研究;E-mail:yaoliping@impcas.ac.cn

通讯作者: 杨建成,E-mail:yaoliping@impcas.ac.cn

English Abstract

Development and Validation of TPIS Program for Two-plane Multiturn Injection and Optimization

1. Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China; 2. School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China; 3. Huizhou Research Center of Ion sciences, Huizhou 516003, Guangdong, China

全文HTML

目录

作者简介:
姚丽萍(1991-),女,甘肃定西人,在读博士,从事加速器物理研究;E-mail:yaoliping@impcas.ac.cn

1. 中国科学院近代物理研究所, 兰州 730000;

2. 中国科学院大学核科学与技术学院, 北京 100049;

3. 惠州离子科学研究中心, 广东惠州 516003

作者简介:
姚丽萍(1991-),女,甘肃定西人,在读博士,从事加速器物理研究;E-mail:yaoliping@impcas.ac.cn

1. Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China;

2. School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China;

3. Huizhou Research Center of Ion sciences, Huizhou 516003, Guangdong, China