Advanced Search

ZHENG Zhongcheng, GUO Liping, TANG Rui. Research Development of Irradiation Damage on Fuel Cladding Materials for SCWR[J]. Nuclear Physics Review, 2017, 34(2): 211-218. doi: 10.11804/NuclPhysRev.34.02.211
Citation: ZHENG Zhongcheng, GUO Liping, TANG Rui. Research Development of Irradiation Damage on Fuel Cladding Materials for SCWR[J]. Nuclear Physics Review, 2017, 34(2): 211-218. doi: 10.11804/NuclPhysRev.34.02.211

Research Development of Irradiation Damage on Fuel Cladding Materials for SCWR

doi: 10.11804/NuclPhysRev.34.02.211
Funds:  International Science & Technology Program of China(2015DFR60370); National Natural Science Foundation of China(11275140, U1532134)
  • Received Date: 2016-06-05
  • Rev Recd Date: 2016-09-22
  • Publish Date: 2017-06-20
  • The Supercritical Water-cooled Reactor (SCWR) is one of the prior Generation IV advanced reactors. Irradiation damage is one of the key issues of fuel cladding materials which will suffer serious environment, such as high temperature, high pressure, high irradiation and supercritical water. The candidate materials contain zirconium alloys, austenitic stainless steels, ferritic/martensitic stainless steels, Ni-base alloys and ODS alloys. Austenitic stainless steels are the most promising materials. This paper summarized the international researches on irradiation effects in fuel cladding materials for SCWR. The group of authors also has done many researches in this field, including nickel-base alloy C-276 and 718, ferritic/martensitic steel P92 and austenitic stainless steel AL-6XN and HR3C. In AL-6XN austenitic stainless steels irradiated by hydrogen ions, dislocation loops were the dominant irradiation defects. At higher irradiation dose (5~7 dpa), the voids were found. All the dislocation loops were confirmed to be 1/3<111> interstitial type dislocation loops, and four evolution stages of dislocation loops with hydrogen retention were suggested.
  • [1] ZHOU Yu, ZHNAG Hongliang, LI Manchang, et al. Nuclear Power Engineering, 2013, 34(1): 60. (in Chinese).(周禹, 张宏亮, 李满昌, 等. 核动力工程, 2013, 34(1): 60.)
    [2] LI Xiang, LI Qing, XIA Bangyang, et al. Nuclear Power Engineering, 2013, 34(1): 5. (in Chinese)(李翔, 李庆, 夏榜样, 等. 核动力工程, 2013, 34(1): 5.)
    [3] XIAO Zejun, LI Xiang, HUANG Yanping, et al. Nuclear Power Engineering, 2013, 34(1): 1. (in Chinese)(肖泽军, 李翔, 黄彦平, 等. 核动力工程, 2013, 34(1): 1.)
    [4] CHENG Xu, LIU Xiaojing. Atomic Energy Science and Tech-nology, 2008, 42(2): 167. (in Chinese)(程旭, 刘晓晶.原子能科学技术, 2008, 42(2):167.)
    [5] TIM A, SUE I. Energy Policy, 2008, 36: 4323.
    [6] CHENG Xu, LIU Xiaojing. Chinese Journal of Nuclear Sci-ence and Engineering, 2009, 29(1): 43. (in Chinese)(程旭, 刘晓晶. 核科学与工程, 2009, 29(1): 43.)
    [7] THOMAS S, LAURENCE K H L, YOSHIAKI O. Progress in Nuclear Energy, 2014, 77: 282.
    [8] LU Daogang, PENG Changhong. Atomic Energy Science and Technology, 2009, 43: 743. (in Chinese)(陆道纲, 彭常宏. 原子能科学技术, 2009, 43: 743.)
    [9] AZEVEDO C R F. Engineering Failure Analysis, 2011, 18:1943.
    [10] GUZONAS D, NOVOTNY R. Progress in Nuclear Energy,2014, 77: 361.
    [11] ARTHUR T M, AYLIN Y, MARCELO J, et al. Journal of Nuclear Materials, 2007, 371: 51.
    [12] MURTY K L, CHARIT I. Journal of Nuclear Materials, 2008,383: 189.
    [13] YVON P, CARRE F. Journal of Nuclear Materials, 2009,385: 217.
    [14] KLUEH R L, NELSON A T. Journal of Nuclear Materials,2007, 371: 37.
    [15] ZHANG L F, BAO Y C, TANG R. Nuclear Engineering and Design, 2012, 249: 180.
    [16] MARIANA R, PETR H, STEPAN S, et al. Nuclear Engi-neering and Technology, 2007, 40(2): 127.
    [17] SCHULENBERG T, STAR? INGER J. Nuclear Engineering and Design, 2011, 241: 3505.
    [18] ZINKLE S J, MAZIASZ P J, STOLLER R E. Journal of Nuclear Materials, 1993, 206: 266.
    [19] GARNER F A. Void swelling and irradiation creep in light water reactor (LWR)environments[C]//TIPPING P G. Un-derstanding and Mitigating Ageing in Nuclear Power Plants-Materials and Operational Aspects of Plant Life Man-agement (PLiM). Boca Raton: CRC Press, 2010: 308.
    [20] JIN S X, GUO L P, YANG Z, et al. Nuclear Instruments and Methods in Physics Research B, 2011, 269: 209.
    [21] JIN S X, HE X F, LI T C, et al. Materials Characterization,2012, 72: 8.
    [22] JIN S X, GUO L P, YANG Z, et al. Plasma Science and Technology, 2012, 14(6): 548.
    [23] JIN S X, GUO L P, REN Y Y, et al. Journal of Materials Science and Technology, 2012, 28(11): 1039.
    [24] JIN S X, LUO F F, MA S L, et al. Nuclear Instruments and Methods in Physics Research B, 2013, 307: 522.
    [25] JIN S X, GUO L P, YANG Z, et al. Materials Characteriza-tion, 2011, 62: 136.
    [26] JIN S X, GUO L P, LI T C, et al. Materials Characterization,2012, 68: 63.
    [27] JIN S X, GUO L P, LUO F F, et al. Scripta Materialia, 2013,68: 138.
    [28] TEYSSEYRE S, JIAO Z, WEST E, et al. Journal of Nuclear Materials, 2007, 371: 107.
    [29] WEST E A, WAS G S. Journal of Nuclear Materials, 2013,441: 623.
    [30] ZHOU R S, WEST E, JIAO Z J, et al. Journal of Nuclear Materials, 2009, 395: 11.
    [31] TEYSSEYRE S, PENG Q, BECKER C, et al. Journal of Nuclear Materials, 2007, 371: 98.
    [32] WAS G S, AMPORNRAT P, GUPTA G, et al. Journal of Nuclear Materials, 2007, 371: 176.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(882) PDF downloads(185) Cited by()

Related
Proportional views

Research Development of Irradiation Damage on Fuel Cladding Materials for SCWR

doi: 10.11804/NuclPhysRev.34.02.211
Funds:  International Science & Technology Program of China(2015DFR60370); National Natural Science Foundation of China(11275140, U1532134)

Abstract: The Supercritical Water-cooled Reactor (SCWR) is one of the prior Generation IV advanced reactors. Irradiation damage is one of the key issues of fuel cladding materials which will suffer serious environment, such as high temperature, high pressure, high irradiation and supercritical water. The candidate materials contain zirconium alloys, austenitic stainless steels, ferritic/martensitic stainless steels, Ni-base alloys and ODS alloys. Austenitic stainless steels are the most promising materials. This paper summarized the international researches on irradiation effects in fuel cladding materials for SCWR. The group of authors also has done many researches in this field, including nickel-base alloy C-276 and 718, ferritic/martensitic steel P92 and austenitic stainless steel AL-6XN and HR3C. In AL-6XN austenitic stainless steels irradiated by hydrogen ions, dislocation loops were the dominant irradiation defects. At higher irradiation dose (5~7 dpa), the voids were found. All the dislocation loops were confirmed to be 1/3<111> interstitial type dislocation loops, and four evolution stages of dislocation loops with hydrogen retention were suggested.

ZHENG Zhongcheng, GUO Liping, TANG Rui. Research Development of Irradiation Damage on Fuel Cladding Materials for SCWR[J]. Nuclear Physics Review, 2017, 34(2): 211-218. doi: 10.11804/NuclPhysRev.34.02.211
Citation: ZHENG Zhongcheng, GUO Liping, TANG Rui. Research Development of Irradiation Damage on Fuel Cladding Materials for SCWR[J]. Nuclear Physics Review, 2017, 34(2): 211-218. doi: 10.11804/NuclPhysRev.34.02.211
Reference (32)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return