高级检索

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于DRS4测试板的数字波形分析方法(英文)

陈泽 胡正国 陈金达 张秀琳 郭忠言 肖国青 孙志宇 黄文学 王建松

陈泽, 胡正国, 陈金达, 张秀琳, 郭忠言, 肖国青, 孙志宇, 黄文学, 王建松. 基于DRS4测试板的数字波形分析方法(英文)[J]. 原子核物理评论, 2015, 32(2): 218-223. doi: 10.11804/NuclPhysRev.32.02.218
引用本文: 陈泽, 胡正国, 陈金达, 张秀琳, 郭忠言, 肖国青, 孙志宇, 黄文学, 王建松. 基于DRS4测试板的数字波形分析方法(英文)[J]. 原子核物理评论, 2015, 32(2): 218-223. doi: 10.11804/NuclPhysRev.32.02.218
CHEN Ze, HU Zhengguo, CHEN Jinda, ZHANG Xiuling, GUO Zhongyan, XIAO Guoqing, SUN Zhiyu, HUANG Wenxue, WANG Jiansong. Analysis of Digital Waveform Methods with DRS4 Evaluation Board[J]. Nuclear Physics Review, 2015, 32(2): 218-223. doi: 10.11804/NuclPhysRev.32.02.218
Citation: CHEN Ze, HU Zhengguo, CHEN Jinda, ZHANG Xiuling, GUO Zhongyan, XIAO Guoqing, SUN Zhiyu, HUANG Wenxue, WANG Jiansong. Analysis of Digital Waveform Methods with DRS4 Evaluation Board[J]. Nuclear Physics Review, 2015, 32(2): 218-223. doi: 10.11804/NuclPhysRev.32.02.218

基于DRS4测试板的数字波形分析方法(英文)

doi: 10.11804/NuclPhysRev.32.02.218

Analysis of Digital Waveform Methods with DRS4 Evaluation Board

  • 摘要: 使用不同的方法来确定LaBr3晶体信号的到达时间。在文中信号经过光电倍增管的放大之后由DSR4 测试板进行数字采集,其中DRS4 是由瑞士PSI 研究所生产的高带宽、低功耗以及快读出时间的开关电容阵。这些优势使得DRS4 很具有吸引力,很多实验将传统的ADC与TDC替换为DRS4。采集的波形可以通过不同的方法进行后续处理。其中包括:(1) 恒分甄别、(2) 波形拟合、(3) PMT脉冲模型法以及(4) 均值过滤法。文中实现的恒分甄别的时间分辨与使用模拟电路获取的平均时间分辨相比没有提高。高斯波形拟合法虽然与数字CFD 的结果相当,但是却更加耗时。均值滤波法虽然容易实现,但是通过这个方法得到的时间分辨与采样时间在一个量级。而PMT脉冲模型法得到的平均时间分辨为195.4 ps,优于模拟信号的恒分甄别的时间分辨254.7 ps。Various digital methods were examined for determining the relative arrival times of pulses from 20 mm x 5 mm LaBr3 scintillators. In this study, pulses from the photomultiplier tubes (PMTs) were digitized by DRS4 evaluation board, a switched capacitor array (SCA) produced by the Paul Scherrer Institute (PSI). The high bandwidth, low power consumption and short readout time make DRS4 attractive for many experiments, replacing traditional ADCs and TDCs. The sampling signals were post processed with multiple techniques. These techniques include: (1) constant-raction discrimination (CFD), (2) pulse-shape fitting, (3) mean PMT pulse model and (4) median filtered zero crossing method.The implemented CFD in the digital regimes did not improve the resolution of using analog equipmentwith average time resolution. The pulse-shape fitting yielded as good resolution as digital CFD, however,is much more time consuming. The median filtered method were easy to implement, and had a resolution on the order of sampling time. Average timing resolutions of 195.4 ps were obtained with mean PMT pulse model, which is better than the analog constant-fraction-zero-crossing with average resolution of 254.7 ps.
  • 加载中
计量
  • 文章访问数:  1415
  • HTML全文浏览量:  126
  • PDF下载量:  580
  • 被引次数: 0
出版历程
  • 收稿日期:  1900-01-01
  • 修回日期:  1900-01-01
  • 刊出日期:  2015-06-20

基于DRS4测试板的数字波形分析方法(英文)

doi: 10.11804/NuclPhysRev.32.02.218

摘要: 使用不同的方法来确定LaBr3晶体信号的到达时间。在文中信号经过光电倍增管的放大之后由DSR4 测试板进行数字采集,其中DRS4 是由瑞士PSI 研究所生产的高带宽、低功耗以及快读出时间的开关电容阵。这些优势使得DRS4 很具有吸引力,很多实验将传统的ADC与TDC替换为DRS4。采集的波形可以通过不同的方法进行后续处理。其中包括:(1) 恒分甄别、(2) 波形拟合、(3) PMT脉冲模型法以及(4) 均值过滤法。文中实现的恒分甄别的时间分辨与使用模拟电路获取的平均时间分辨相比没有提高。高斯波形拟合法虽然与数字CFD 的结果相当,但是却更加耗时。均值滤波法虽然容易实现,但是通过这个方法得到的时间分辨与采样时间在一个量级。而PMT脉冲模型法得到的平均时间分辨为195.4 ps,优于模拟信号的恒分甄别的时间分辨254.7 ps。Various digital methods were examined for determining the relative arrival times of pulses from 20 mm x 5 mm LaBr3 scintillators. In this study, pulses from the photomultiplier tubes (PMTs) were digitized by DRS4 evaluation board, a switched capacitor array (SCA) produced by the Paul Scherrer Institute (PSI). The high bandwidth, low power consumption and short readout time make DRS4 attractive for many experiments, replacing traditional ADCs and TDCs. The sampling signals were post processed with multiple techniques. These techniques include: (1) constant-raction discrimination (CFD), (2) pulse-shape fitting, (3) mean PMT pulse model and (4) median filtered zero crossing method.The implemented CFD in the digital regimes did not improve the resolution of using analog equipmentwith average time resolution. The pulse-shape fitting yielded as good resolution as digital CFD, however,is much more time consuming. The median filtered method were easy to implement, and had a resolution on the order of sampling time. Average timing resolutions of 195.4 ps were obtained with mean PMT pulse model, which is better than the analog constant-fraction-zero-crossing with average resolution of 254.7 ps.

English Abstract

陈泽, 胡正国, 陈金达, 张秀琳, 郭忠言, 肖国青, 孙志宇, 黄文学, 王建松. 基于DRS4测试板的数字波形分析方法(英文)[J]. 原子核物理评论, 2015, 32(2): 218-223. doi: 10.11804/NuclPhysRev.32.02.218
引用本文: 陈泽, 胡正国, 陈金达, 张秀琳, 郭忠言, 肖国青, 孙志宇, 黄文学, 王建松. 基于DRS4测试板的数字波形分析方法(英文)[J]. 原子核物理评论, 2015, 32(2): 218-223. doi: 10.11804/NuclPhysRev.32.02.218
CHEN Ze, HU Zhengguo, CHEN Jinda, ZHANG Xiuling, GUO Zhongyan, XIAO Guoqing, SUN Zhiyu, HUANG Wenxue, WANG Jiansong. Analysis of Digital Waveform Methods with DRS4 Evaluation Board[J]. Nuclear Physics Review, 2015, 32(2): 218-223. doi: 10.11804/NuclPhysRev.32.02.218
Citation: CHEN Ze, HU Zhengguo, CHEN Jinda, ZHANG Xiuling, GUO Zhongyan, XIAO Guoqing, SUN Zhiyu, HUANG Wenxue, WANG Jiansong. Analysis of Digital Waveform Methods with DRS4 Evaluation Board[J]. Nuclear Physics Review, 2015, 32(2): 218-223. doi: 10.11804/NuclPhysRev.32.02.218

目录

    /

    返回文章
    返回