Linear Optics Model Correction at SSRF Storage Ring
doi: 10.11804/NuclPhysRev.28.03.290
- Received Date: 1900-01-01
- Rev Recd Date: 1900-01-01
- Publish Date: 2011-09-20
-
Key words:
- COD correction /
- beam based alignment /
- linear optics correction /
- coupling correction
Abstract: In the commissioning stage of Shanghai Synchrotron Radiation Facility(SSRF) storage ring, several methods were used to correct the linear optics. Beam Based Alignment(BBA) was used for BPM\|Quadrupole offsets measurement; Response matrix was used for orbit correction; LOCO was used for linear optics fitting, and quadrupoles strength were adjusted to correction the beta function; coupling was measured and corrected by skew quadrupoles. After correction, closed orbit are reduced to 50/60 μm in hortizontal and vertical plane; β beating and dispersion errors are less than 1%; betatron tune and emmittance are closed to the design value; betatron coupling also can be adjusted from 0.02% to 2%. These methods have been proved to be useful for storage ring calibrations, with the help of these methods, SSRF storage ring can be tuned to the design model and other model easily.
Citation: | ZHANG Man-zhou, HOU Jie, LI Hao-hu, CHEN Jian-hui, TIAN Shun-qiang, ZHANG Wen-zhi. Linear Optics Model Correction at SSRF Storage Ring[J]. Nuclear Physics Review, 2011, 28(3): 290-095. doi: 10.11804/NuclPhysRev.28.03.290 |