Preliminary  Test  of  SC  Solenoid  for  ADS  InjectorⅡ

YANG  Xiao-liang; MA  Li-zhen; HAN  Shaofei; GUAN  Ming-zhi; YANG  Tong-jun; DU  Jun-jie; NI  Dong-sheng; ZHENG  Shi-Jun; WU  Wei; YANG  Wen-jie; ZHU  Li; WU  Bei-min; CHEN  Yu-quan

doi:10.11804/NuclPhysRev.29.03.244

PDF
Cite
Share
facebook

twitter

google

linkedin

Volume 29 Issue 3

Turn off MathJax

Article Contents

Article Navigation > Nuclear Physics Review > 2012 > 29(3): 244-247

YANG Xiao-liang, MA Li-zhen, HAN Shaofei, GUAN Ming-zhi, YANG Tong-jun, DU Jun-jie, NI Dong-sheng, ZHENG Shi-Jun, WU Wei, YANG Wen-jie, ZHU Li, WU Bei-min, CHEN Yu-quan. Preliminary Test of SC Solenoid for ADS InjectorⅡ[J]. Nuclear Physics Review, 2012, 29(3): 244-247. doi: 10.11804/NuclPhysRev.29.03.244

Citation:

YANG Xiao-liang, MA Li-zhen, HAN Shaofei, GUAN Ming-zhi, YANG Tong-jun, DU Jun-jie, NI Dong-sheng, ZHENG Shi-Jun, WU Wei, YANG Wen-jie, ZHU Li, WU Bei-min, CHEN Yu-quan. Preliminary Test of SC Solenoid for ADS InjectorⅡ[J]. Nuclear Physics Review, 2012, 29(3): 244-247. doi: 10.11804/NuclPhysRev.29.03.244

Preliminary Test of SC Solenoid for ADS InjectorⅡ

doi: 10.11804/NuclPhysRev.29.03.244

1.
Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China; 2.Graduate University of Chinese Academy of Sciences, Beijing 100049, China; 3.Lanzhou University of Technology, Lanzhou 730050, China

Received Date: 1900-01-01
Rev Recd Date: 1900-01-01
Publish Date: 2012-09-20

Abstract

The preliminary test of the superconducting solenoid for ADS injectorⅡhas been carried out in order to measure its performances. A vertical dewar with height 1 600 mm and outer diameter 510 mm was employed for this test. The magnet was energized by a cryogenic sms superconducting magnet current source. The axial magnetic distribution and leakage field were also tested through hall probes. The center field can be excited up to 8.20 T and the relative diviation between the measured value and the calculated value of the stray and leakage field is less than 10%. The measurements of the strain and stress status of the magnet skeleton show that the distortion is small and the mechanical performance is robust.
- SC solenoid,
- accelerator driven subcritical system,
- vertical test,
- magnetic field measurement
References
Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article Metrics

Article views(2428) PDF downloads(559) Cited by()

Proportional views

Preliminary Test of SC Solenoid for ADS InjectorⅡ

doi: 10.11804/NuclPhysRev.29.03.244

1. Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China; 2.Graduate University of Chinese Academy of Sciences, Beijing 100049, China; 3.Lanzhou University of Technology, Lanzhou 730050, China

Received Date: 1900-01-01
Rev Recd Date: 1900-01-01
Publish Date: 2012-09-20

Key words:

SC solenoid /
accelerator driven subcritical system /
vertical test /
magnetic field measurement

Abstract: The preliminary test of the superconducting solenoid for ADS injectorⅡhas been carried out in order to measure its performances. A vertical dewar with height 1 600 mm and outer diameter 510 mm was employed for this test. The magnet was energized by a cryogenic sms superconducting magnet current source. The axial magnetic distribution and leakage field were also tested through hall probes. The center field can be excited up to 8.20 T and the relative diviation between the measured value and the calculated value of the stray and leakage field is less than 10%. The measurements of the strain and stress status of the magnet skeleton show that the distortion is small and the mechanical performance is robust.

Citation:

YANG Xiao-liang, MA Li-zhen, HAN Shaofei, GUAN Ming-zhi, YANG Tong-jun, DU Jun-jie, NI Dong-sheng, ZHENG Shi-Jun, WU Wei, YANG Wen-jie, ZHU Li, WU Bei-min, CHEN Yu-quan. Preliminary Test of SC Solenoid for ADS InjectorⅡ[J]. Nuclear Physics Review, 2012, 29(3): 244-247. doi: 10.11804/NuclPhysRev.29.03.244